At Hersa Structures we have extensive experience installing and designing industrial roofs in the city of Querétaro. We have experience in suitable materials, as well as ductwork which runs through these ceilings. The industry is increasingly demanding regarding the roofs and covers to use, they increasingly require them to have more insulation and less maintenance, which makes industrial roofs a niche with continuous improvement like any other niche.
Within industrial ceilings, the following variables must be considered to be able to design and execute correctly.
Encourage to design your industrial ceiling with us.
VENTILATION
The issue of ventilation within industrial roofs is a fundamental issue, since correct circulation and use of natural air is necessary. That is why when designing an industrial roof or roof it is necessary to carry out a wind analysis. Since it will save us energy, the air quality will also be cleaner. To design air inlets on the roof, whether with windows, slopes, headlights, etc. Another very important factor in the ventilation of industrial roofs will be the height and placement of the auxiliary access doors. In any case, fans would have to be installed, but they would only recirculate air. Above all, in Querétaro, when the climate becomes arid, it is essential to correctly design ventilation.
AIR EXTRACTION
Unlike ventilation, extraction is a mechanized system that is used to extract hot air, dust or particles of raw material. On industrial roofs they are atmospheric fans or well known as onions. Air conditioning is the most used extraction system, so when designing an industrial roof, the reinforcements where these facilities will sit and rest must be taken into account. As well as access and so on.
An industrial roof is not a simple roof, but a technically reinforced roof to receive and support all these types of facilities.
INSULATORS
With the increase in temperature and especially in Querétaro; Industrial roofs are forced to insulate themselves from the same heat. Both for those that are already built, and for those that are about to be built.
Industrial roofs that are about to be built are generally using multi-roof, or multi-panel or colloquially sanchiwch panel; But what about those that are already made and did not consider this material? The solution is a technique that consists of putting the insulation on top of the current sheet and putting another sheet on top, thus creating a multi-roof.
LIGHTNING
Lighting is a key factor for industrial ceilings, since, for example, a large influx of natural light represents a large energy saving, everything will depend on the activity to be carried out or the product to be handled. There is low-consumption LED industrial lighting for those warehouses that were not designed with natural light inputs. The industrial ceilings that we have made in Querétaro are always prepared to hang any type of lamp.
CEILINGS CALCULATED FOR OTHER WEIGHTS
It is common for many installations to be hung from industrial ceilings, but not in all cases, such as fire protection systems, water pipes, gas or air pipes, and air conditioning ducts. Therefore, when designing and building an industrial roof, it is imperative to first review the entire engineering system. We have extensive experience reinforcing our industrial ceilings for all these installations.